The Ryve 115 29
A Marathon Bike Made to Rip it Up
The Ryve 115 effectively kills the notion that marathon race bikes are all work and no play. It’s a precision rocket made for conquering Leadville and the epic race dates that crowd your calendar--with a big dose of playfulness for everyday shredding. We created this bike for goal-oriented strivers who want—no, need--to win, but who also know that podiums and personal bests should never come at the expense of pure riding fun.
The Ryve 115 marks a paradigm shift for lightweight, full-suspension carbon race bikes due in large part to Spot’s Living Link™ suspension platform, our proprietary system that couples a composite leaf spring with the main pivot. Living Link™ has won accolades from journalists and riders alike as the most efficient suspension design on the market. If you read mountain bike reviews, you’ve probably heard a thing or two about Living Link™ on our bigger-travel Mayhems and Rolliks. Our goal with the Ryve 115 is to bring these benefits to marathon racers.
The beauty of Living Link™ is that it’s engineered to be ridden wide open on climbs. Forget locking out. Don’t do it. Living Link™ is designed and tuned to deliver an energy boost over roots and rocks while climbing, which means you can stand and stomp with no efficiency loss. The composite leaf spring, paired with a Fox factory-tuned shock, has an anti-squat response that effectively stores the energy created when the suspension compresses. Then, as the leaf spring returns to its un-compressed state, Living Link™ releases this stored energy at the optimal time in the pedaling stroke. Our leaf spring has other benefits, too: It eliminates the most failure-prone cartridge bearings, decreasing maintenance while simultaneously increasing the frame’s lateral stiffness. Many bikes in this category use simplistic single-pivot suspension that are way too mushy. The Ryve 115’s Living Link™ delivers best-in-class suspension kinematics for trail-hugging efficiency. Find out more about Living Link™ here.
Now a word on dropper posts: Many racers don’t run ‘em on their endurance race bikes. We spec a dropper on the Ryve 115 because races aren’t won only on the climbs. Long descents are where you gap the competition. The Ryve 115’s dropper, combined with Living Link™, means you can descend faster and more confidently at maximum speeds. No more endos, nose wheelies or stomachs pressed to saddles. You are faster because a lower center of gravity provides performance enhancing stability that means you can rail fast and flowy sections as well as steep and technical trails. When racing or just out for a weekend hammer with friends, you can let the Ryve 115 fly—bunny hopping and hitting trailside features. All while getting to those cold beers stashed at the trailhead before your mates. This bike is made to be ridden in either baggies or race-day lycra.
Rounding out this high-performance package is the Ryve 115’s carbon frame, which is designed and built to Spot’s exacting standards. Our frame molds assure incredible compaction that eliminates voids in the matrix during manufacturing—exceeding our thresholds for strength while maintaining lightweight characteristics. Complete bikes start at just 24.2 pounds, with dropper! Travel-wise, the bike comes with 120mm of front travel and 115mm rear. And hey, if you absolutely believe you must lock out, we will sell you a build kit with that option, because you deserve to benefit from the race-winning attributes of Living Link™ on the descents.
We offer multiple build kits with four frame sizes from XL to S. And because we sell direct via our Spot Inside Line™ service, you get a perfectly tuned bike delivered to your door or local shop, minus the middleman markup. That amounts to white glove service on an elite-level bike for thousands less. Read more about Inside Line™ here.
We incorporated many other ingenious features into the bike’s design, too. Our Groovy Guides integrate the brake lines into the tube shape to eliminate the potential for snagging on rocks, branches or clothing. The guides provide a clean, modern look that also simplifies swapping out brakes for races or travel.
The Ryve 115’s DoppelBox lower shock mount has a double box structure for increased frame strength and stiffness that centralizes mass lower on the frame. Two inner walls boost torsional stiffness between the headtube and bottom bracket, transferring shock forces along the inside walls. This design protects the shock bushing by enabling moisture and trail grit to freely exit the frame, providing improved bushing longevity.
Our carbon Rocker link on the shock is ultra-light and stiff, utilizing a trunnion mount for a compact and tidy design that delivers improved performance. Spot’s trunnion bearings are optimized for high-rotation applications. That means they reduce friction and deliver heightened small-bump sensitivity—while also giving you a vastly longer service life than traditional bushings.
We designed the brake mounts to transfer braking forces into the chainstay, allowing us to lighten the seatstay. And we positioned the mounts to protect the caliper and hose. By incorporating the mount into one machined part with the axle bore and dropout, brake alignment remains true while reducing threaded holes in the frame.
The Ryve’s conical pivot axles eliminate creaks by strengthening the connection of the axles to the frame—increasing bearing life by eliminating play. This design feature also unifies the pivot axles with the front triangle for better stiffness and power transfer.
We incorporate dual row full-complement bearings that distribute and diffuse forces over more balls for longer bearing life. This likewise eliminates play. And all our bearings are O-ring sealed to keep contamination out.
In short, we’ve thought through every minute detail. The Ryve 115 is engineered to ensure maximum performance and easy maintenance. Ryve is a riff on the word rive, as in to rip apart. The name precisely articulates what Spot has done to the standard playbook for marathon race bikes with the creation of the Ryve 115. We’ve ripped it up and thrown it in the rubbish. Out-of-the-saddle efficiency, best-in-class small-bump compliance, nimble climbing and aggressive descending: the Ryve 115 is indeed a paradigm shifter. You’ll want to add a few more dates to your race calendar.
*Shipping in May 2019
Living Link™ Suspension System
The Living Link™ system re-imagines and reinvents full-suspension technology to provide riders with multiple benefits over conventional systems. We accomplish this by replacing the standard, maintenance-prone cartridge bearings with a highly-developed composite leaf spring. We pair it with a finely-tuned air shock, which works in conjunction with the leaf spring, to harness the advantages of both. The Living Link™ leaf spring is both laterally stiff and vertically dynamic, providing a progressive flex through its range of motion. The result is a leap forward in bike handling, durability, longevity and pure fun.
Vertically Dynamic, Laterally and Torsionally Strong
At rest, the Living Link™ is relaxed, with no stresses imposed. As the suspension compresses, the carbon leaf spring flexes. When the rear axle reaches a point approximately halfway through its travel range, the leaf spring reaches its maximum flex. As the rear axle reaches full compression, the leaf spring relaxes again. The result is a spring contribution to the suspension system. Consider it a boost of superpower when you most need it on long technical climbs.
The Living Link™ also improves riding efficiency. It does so by enhancing the spring curve in the mid-stroke of the suspension travel. How? By working in tandem with the shock’s air spring to make the overall curve more linear in the middle of its travel. A more linear curve increases the suspension response in the mid stroke, where a bike spends most of its time. It’s simply a higher quality ride experience than any other suspension technology on the market.
Living Link™ also addresses a flaw of typical suspension systems: lateral flex. The composite plate of the leaf spring provides dynamic flex vertically, but it is superpower stiff laterally. Think about a metal ruler. You can easily bend it with your hands across its flat surface. Now tip that ruler on edge and try to bend it. No chance. The composite leaf spring, acting as a shear plate, works the same way. It promotes and harnesses flex vertically and prevents it laterally and torsionally. Yeah, like we said, superpowered.
Lighter Weight, Improved Durability, 3 Million Flex Cycles
Let’s be honest, most modern suspension systems are pretty good—when brand new. But their ride quality quickly fades under real world riding. Not so with Living Link™, which reduces wear and tear by eliminating the most problematic set of bearings in typical multi-link bikes and replacing it with one composite piece. That magical leaf spring means less maintenance, lighter weight, and one less pivot to impede efficiency. We love mechanics, but this suspension allows you to stay on the trail and out of the shop for many seasons of adventure.
The Living Link™ leaf spring is manufactured to maintain the strictest QC. And we use the same precise molding and CNC machining employed in the manufacture of ballistic military helmets and high-tech prostheses. This use of cutting-edge materials and carefully controlled manufacturing processes results in a leaf spring that can support the weight of two full size pickups. That’s pretty damn tough. So tough that we tested it in the laboratory to three million flex cycles without failure. That’s the equivalent of riding 7 days a week for 12 years. That’s some serious muscle.
Trail-hugging Efficiency, Playful Descending
We are proud to live, work and play in the Rocky Mountains. The riding here is technical and rocky and aggressive. For riders of the Ryve, that means your Living Link™ system has been battle tested on epic trails. We fine-tuned the Living Link™ to handle all the nastiness that the Rockies can dish out—both uphill and down. It delivers precision control on rowdy descents and gluey traction on technical climbs. That is a rare feat for other rear shocks on the market, which are designed to maximize performance in their “open” modes. The Living Link™ system was designed with an anti-squat response, which enables the rider to climb efficiently with the shock wide open. In addition, the kinematics of the suspension system provide a large pedaling sweet spot. The end game: you will ride more confidently both up and down.
On other suspension systems, pedaling performance is compromised if the shock pressure is too high or too low. Not so with Living Link™. It delivers efficient acceleration in a large range of suspension sag settings. Riders who like it super firm, as well as those who like it plush, are all rewarded with a bike that climbs like a goat with its tail on fire. We accomplish this holy grail of climbing efficiency and descending performance by finely tuning the leverage ratio curve to work harmoniously with high quality air shocks.
Advanced Construction Processes
The Ryve frame and its components are constructed using the most advanced processes in the composites industry. Instead of outdated tube-to-tube or conventional bladder molding, our carbon construction facility fabricates each frame using a rigid EPS foam mandrel. The mandrel is custom formed for the Ryve, and its parts are shaped in a bespoke mold that represents the shape of the volume contained within the part. The carbon fiber plies are arranged precisely on the mandrel. This technique ensures that nothing can move out of position when the mandrel and layup are inserted into the curing mold.
During the curing process the EPS foam expands uniformly, creating outward pressure on the carbon plies. The foam ensures even distribution of compaction forces on the layup throughout the part. This prevents voids and delamination. The control and consistency of this approach are unrivaled. The benefits of the highest-end materials and our superior construction methods ensure that each Ryve frame delivers years of performance and quality. Our production facility works for some of the best names in high-end bikes. We feel so strongly about our frame durability that we back every Ryve frame with a 5-year warranty.
The Ryve’s frame geometry is advanced. We designed the bike to place the rider’s weight precisely between the front and rear wheels. We accomplish this by extending the measurement between the bottom bracket and front axle. A roomy front center creates a stable ride, and mistakes are less consequential. The seat tube has been steepened accordingly, as this helps keep the rider’s weight between the wheels. This geometry eliminates front-end lift and makes technical terrain easier to conquer. All of this means you spend less energy balancing your bike, allowing you to feel fresh and juiced up for those burst of power that allow you to drop your buddies.
The steep seat tube angle of the Ryve has descending benefits as well. Equipped with a dropper seat post, the Ryve positions the seat farther forward in the dropped position. This gives you more room to move on difficult descents, placing you in an optimal position for more aggressive riding. You can personalize your seat angle by simply moving your saddle forward or back.
A Better Fit for Riders of all Sizes
While people range vastly in height, weight, leg length, and other physical measurements, most mountain bikes do not scale accordingly. The Ryve provides a better size range. The seat tube angle on our XL frame is slightly steeper than the large, which brings the tall rider’s center of gravity forward on climbs.
On the other end of the spectrum, all sizes of our frames feature a low stand-over height that allows men and women with shorter inseams to find a perfect fit. We don’t skimp on the amenities for smaller riders, either. Some small frames from other brands have no space for a water bottle. Our small Ryve frame has space for a medium water bottle within the front triangle. That’s great for riders who like to bust out light and fast without a pack.
Want to Ryve it up? Riding is believing, so check out listing of demo events. At Spot Brand, we have developed a reputation for thinking outside the box and designing solutions that deliver a better ride. At the office, and in the design lab, we work in a mode of focused control. Get us out on the trail, however, and we Ryve it up!
See this diagram for an explanation of Ryve geometry terms.
|Eff. Top Tube Length||22.8" (578mm)||23.9" (607mm)||24.6" (626mm)||25.4" (644mm)|
|Seat Tube Length||15" (381mm)||17" (431mm)||19" (483mm)||21" (533mm)|
|Eff. Seat Tube Angle||75.0°||75.0°||75.0°||76.0°|
|Actual Seat Tube Angle||72.6°||72.6°||72.6°||73.9°|
|Head Tube Length||3.5" (90mm)||3.9" (100mm)||4.3" (110mm)||4.7" (120mm)|
|Head Tube Angle||67.4°|
|Bottom Bracket Drop||1.3" (34.0mm)|
|Est. Bottom Bracket Height||13.2" (336mm)|
|Wheel Base||44.8" (1138mm)||45.9" (1167mm)||46.8" (1188mm)||47.9" (1216mm)|
|Front Center||27.7" (703mm)||28.8" (732mm)||29.6" (753mm)||30.7" (781mm)|
|Rear Center||17.1" (435mm)||17.1" (435mm)||17.1" (435mm)||17.1" (435mm)|
|Reach||16.5" (420mm)||17.5" (445mm)||18.5" (470mm)||19.5" (495mm)|
|Stack||23.3" (593mm)||23.7" (602mm)||24.1" (611mm)||24.4" (621mm)|
|Standover||27.7" (704mm)||28.1" (715mm)||28.6" (726mm)||29.1" (738mm)|
|4-Star Build Kit||5-Star Build Kit||6-Star XTR Build Kit||6-Star AXS Build Kit|
|Shock||Fox Performance Float DPS EVOL LV, 3 Pos. Adj, Trunnion, 0.2 VS, 165x45||Fox Factory Float DPS EVOL LV, 3 Pos. Adj, Trunnion, 0.2 VS, 165x45||Fox Factory Float DPS EVOL LV, 3 Pos. Adj, Trunnion, 0.2 VS, 165x45||Fox Factory Float DPS EVOL LV, 3 Pos. Adj, Trunnion, 0.2 VS, 165x45|
|Fork||Fox Performance 34 Float Step-Cast 29, 120mm travel, 3Pos-Adj, Grip, 44mm Rake, Boost 15QRx110||Fox Factory Float 34 Step-Cast 29, 120mm travel, 3Pos-Adj, FIT4, 44mm Rake, Boost 15QRx110||Fox Factory Float 34 Step-Cast 29, 120mm travel, 3Pos-Adj, FIT4, 44mm Rake, Boost 15QRx110||Fox Factory Float 34 Step-Cast 29, 120mm travel, 3Pos-Adj, FIT4, 44mm Rake, Boost 15QRx110|
|Headset||Cane Creek 40, ZS44/ZS56 ZS44 upper, ZS56 lower||Cane Creek 40, ZS44/ZS56 ZS44 upper, ZS56 lower||Cane Creek 40, ZS44/ZS56 ZS44 upper, ZS56 lower||Cane Creek 40, ZS44/ZS56 ZS44 upper, ZS56 lower|
|Crankset||SRAM FC GX Eagle, B148, DUB, 170mm, 32t||SRAM X1 Carbon Eagle B148, DUB 170mm, 32t||Race Face Next R 170mm, 32t, Carbon||SRAM XX1 Eagle, B148, DUB, 170mm, 32t|
|Cassette||SRAM XG1275, 12-speed, 10-50t||SRAM XG1275, 12-speed, 10-50t, BLK||Shimano M9100 XTR, 12-speed, 10-51t||SRAM XG1299, 12-speed, 10-50t, Rainbow|
|Rear Derailleur||SRAM GX Eagle, 12-speed||SRAM XO1 Eagle BLK, 12-speed||Shimano M9100 XTR, 12-speed||SRAM AXS Eagle, Wireless, 12-speed|
|Rear Shifter Lever||SRAM GX Eagle 12-speed||SRAM GX Eagle 12-speed||Shimano M9100 XTR 12-speed||SRAM AXS Eagle, Wireless, 12-speed|
|Bottom Bracket||SRAM DUB PF 92||SRAM DUB PF 92||Race Face PF 92, 30mm||SRAM DUB PF 92|
|Front Brake||SRAM Level TL, 180mm Centerline Rotor, 6-bolt||SRAM Level TLM, 180mm Centerline rotor, 6-bolt||Shimano M9100 XTR, 180mm rotor, CenterLock||SRAM Level Ultimate, 180mm Centerline rotor, 6-bolt|
|Rear Brake||SRAM Level TL, 160mm Centerline Rotor, 6-bolt||SRAM Level TLM, 160mm Centerline rotor, 6-bolt||Shimano M9100 XTR, 160mm rotor, CenterLock||SRAM Level Ultimate, 160mm Centerline rotor, 6-bolt|
|Chain||SRAM GX Eagle||SRAM GX Eagle||Shimano 9100 XTR||SRAM XX1 Eagle, Rainbow|
|Front Wheel||Stan's No Tubes Crest S1 29, 6-bolt, Boost 15x110||Stan's No Tubes Crest MK3 29, 6-bolt, Boost 15x110||Enve M525 29, IndustryNine Hydra, CenterLock, Boost 15x110||Enve M525 29, IndustryNine Hydra, CenterLock, Boost 15x110|
|Rear Wheel||Stan's No Tubes Crest S1 29, XD Driver, 6-bolt Boost 12x148||Stan's No Tubes Crest MK3 29, Tubeless, XD Driver, 6-bolt, Boost 12x148||Enve M525 29, IndustryNine Hydra, Micro Spline, CenterLock, Boost 12x148||Enve M525 29, IndustryNine Hydra, XD Driver, CenterLock, Boost 12x148|
|Front Tire||Schwalbe Nobby Nic 29x2.35||Schwalbe Nobby Nic 29x2.35||Schwalbe Nobby Nic 29x2.35||Schwalbe Nobby Nic 29x2.35|
|Rear Tire||Schwalbe Racing Ralph 29x2.25||Schwalbe Racing Ralph 29x2.25||Schwalbe Racing Ralph 29x2.25||Schwalbe Racing Ralph 29x2.25|
|Stem||Race Face Turbine, 31.8mm x 60mm||Race Face Turbine, 31.8mm x 60mm||Race Face Turbine, 31.8mm x 60mm||Race Face Turbine, 31.8mm x 60mm|
|Handlebar||Race Face Turbine, 31.8mm x 760mm width, 20mm rise, Alloy||Enve M6 780mm, 25mm rise, 31.8mm Carbon||Enve M6 780mm, 25mm rise, 31.8mm Carbon||Enve M6 780mm, 25mm rise, 31.8mm Carbon|
|Grips||ODI Vans Slip-on||ODI Vans Slip-on||ODI Vans Slip-on||ODI Vans Slip-on|
|Seat Post||BikeYoke Revive 160mm for XL and Large, 125mm for Medium and Small, Internal, 31.6||BikeYoke Revive 160mm for XL and Large, 125mm for Medium and Small, Internal, 31.6||BikeYoke Revive 160mm for XL and Large, 125mm for Medium and Small, Internal, 31.6||Sram AXS 160mm for XL and Large, 125mm for Medium and Small, Wireless, 31.6|
|Saddle||WTB Silverado||WTB Silverado||WTB Silverado||WTB Silverado|